Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 21.501 SLD 3
- Maximum reliability due to PALTRONIC
- High operator friendliness thanks to optional radio remote control
- Shorter load cycle times due to High Speed extension
Max. lifting moment | 20.9 |
Max. lifting capacity | 6200 |
Max. hydraulic outreach | 14.9 |
Max. manual outreach | 19.1 |
Slewing angle | 400° |
Slewing torque | 2.3 |
Stabilizer spread (std) | 5.0 m |
Width folded | 2.50 |
Max. operating pressure | 330 |
Pump capacity | 45 - 60 l/min |
Dead weight (std.) | 2260 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | 20.5 mt | 8.2 m | 400 | 2.3 | 33.0 Mpa | 45-60 | 2250 kg | 2310 mm | 2550 mm | 905 mm | 8100 mm | - | 2500 kg |
B | 20.0 mt | 10.0 m | 400 | 2.3 | 33.0 Mpa | 45-60 | 2410 kg | 2310 mm | 2550 mm | 905 mm | 10300 mm | - | 1800 kg |
C | 19.6 mt | 12.6 m | 400 | 2.3 | 33.0 Mpa | 65-90 | 2540 kg | 2310 mm | 2550 mm | 975 mm | 12500 mm | - | 1380 kg |
D | 19.3 mt | 14.9 m | 400 | 2.3 | 33.0 Mpa | 45-60 | 2640 kg | 2310 mm | 2550 mm | 975 mm | 14800 mm | - | 1080 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.